I. Startup
1. Power On: Turn on the power switch to put the machine into standby mode.
2. Load the Program: Store the program on a USB drive, insert it into the machine's USB port, and follow the instructions in the machine manual to load the program into the CNC grinder.
3. Install the Fixture: Install the appropriate fixture according to the machining requirements to ensure a stable clamping of the workpiece.
II. Preheating
1. Motor Preheating: Before starting, the motor must be preheated to reach the required operating temperature.
2. Mechanical Preheating: Precision grinders require mechanical preheating before starting to achieve stable operating conditions.
III. Cutting
1. Tool Selection: Select the appropriate tool based on the machining requirements.
2. Machining Parameter Setting: Set the machining parameters in the machining program, including cutting depth, cutting speed, and feed rate.
3. Manual Position Adjustment: Follow the program prompts to adjust the position in manual mode. Parameters such as depth and angle must be adjusted to the correct position.
4. Start Cutting: After setting the machining parameters, press the Start button to begin the machine operation.
IV. Processing
1. Automatic Processing: After the machine starts, the program automatically completes the machining task.
2. Manual Adjustment: If you need to adjust machining parameters during the machining process, you can do so in manual mode.
V. Shutdown
1. Stop Cutting: After the machining task is completed, press the Stop button to stop the machine.
2. Machine Cleaning: Clean and maintain the CNC grinder according to the machine manual.
3. Power Off: After cleaning and maintenance, turn off the machine power.
The above describes how to operate a CNC grinder. Users should carefully read the machine manual and follow the correct procedures. At the same time, pay attention to safe operation to ensure the normal operation and service life of the machine.





